Dropped Kerb Guide

Permeable tarmac driveways (porous asphalt): rules, build and upkeep

Permeable tarmac, usually called porous asphalt, is a tarmac-type surface with open voids that let rain soak through into a stone sub-base. Laid properly at a house in England, it normally lets you surface a front garden of any size without planning permission. Ordinary tarmac doesn't.

Last reviewed: Edited by our editor

Quick answer. Permeable tarmac (porous asphalt) lets rain soak through the surface into an open-graded stone sub-base. In England, at a house, a driveway of any size that does this doesn’t need planning permission. An ordinary tarmac front driveway over 5 square metres does, unless the water runs to a lawn, border or soakaway on your land. If you’re also getting a dropped kerb, many councils want the driveway to keep water off the pavement. Some, such as Birmingham and Bristol, name porous tarmac or porous asphalt as acceptable.

What permeable tarmac is

Most people call an asphalt driveway "tarmac". The government’s guidance on the permeable surfacing of front gardens uses the word asphalt, and names porous asphalt as one of the hard surfaces that let water soak in: the material has "open voids across the surface", and it is laid over a permeable sub-base. Councils use both names. Birmingham says "porous tarmac", while Bristol and Bracknell Forest say porous asphalt. You may also see porous or permeable tarmacadam.

Ordinary tarmac is different. The guidance treats conventional asphalt, concrete and block paving as impermeable surfaces, and Cumberland lists standard "tarmac" among the traditional impermeable driveways. For the wider choice of permeable surfaces (gravel, permeable block paving, reinforced grass and soakaways), see our main guide to permeable driveways.

Planning permission: when tarmac needs it

In England, laying or replacing a hard surface at a house is permitted development under Class F of the General Permitted Development Order 2015, with one condition for the front. If the surface is between the front wall of the house and a highway, and it covers more than 5 square metres (or more than 5 square metres is being replaced), it must either be made of porous materials or drain to a permeable or porous area within the property. If it does neither, you need planning permission.

The Planning Portal puts it simply: you won’t need planning permission if "a new or replacement driveway of any size uses permeable (or porous) surfacing", such as porous asphalt, or if the rainwater is directed to a lawn or border to drain naturally. In practice, for tarmac at the front of a house in England:

  • Porous asphalt over a permeable sub-base: no planning permission needed for the surface, at any size.
  • Ordinary tarmac that falls to a lawn, border, rain garden or soakaway on your land: no planning permission needed, provided the water really reaches that permeable area.
  • Ordinary tarmac over 5 m² that drains to the road or a drain: planning permission needed. Replacing an old drive counts too, because the condition also applies where more than 5 m² of surface is replaced.

These rights are for houses. In England a "dwellinghouse" doesn’t include a flat (GPDO 2015, article 2), and rights can be removed by an article 4 direction or a condition on an earlier planning permission. If you do need to apply, the 2008 guidance’s fee of £150 is long out of date: current planning fees are on the government’s fees for planning applications page.

Wales, Scotland and Northern Ireland have their own versions of the rule. Wales and Scotland apply it to new front surfaces whatever their size. The nation-by-nation table is in when the law requires a permeable driveway, and flats, listed buildings and other exceptions are covered in do I need planning permission for a driveway?

Councils, tarmac and your dropped kerb

A new driveway usually comes with a new dropped kerb, and they’re separate permissions. Planning rules decide what you can lay in your garden. To drive across the pavement, you also need the highway authority’s consent for a vehicle crossing (in England and Wales under section 184 of the Highways Act 1980). Where the two meet is drainage. In England and Wales, section 163 of the Highways Act 1980 lets the highway authority require works to stop surface water from premises flowing onto the footway, and many councils make keeping water off the pavement a condition of a dropped kerb.

What some councils say about tarmac and porous asphalt for the driveway behind a dropped kerb (examples, checked on each council's own website on 12 November 2026)
CouncilWhat the council says
BirminghamOnce the application is approved you must build a permeable hardstanding before the council does any work to the kerb. Its examples of permeable hardstanding include “porous tarmac/concrete”. Applications are declined if the driveway is steeper than 1 in 10. (source)
BristolThe driveway must be porous asphalt, porous concrete blocks, or concrete or clay block permeable paving, laid on a sub-base such as 4/20 or Type 3. No loose gravel. (source)
Bracknell ForestLists “non-porous tarmac” (and non-porous resin) as examples of materials that need planning permission over 5 m², and porous asphalt as a surface that doesn't. (source)
CumberlandTreats standard ‘tarmac’ as a traditional impermeable surface that needs planning permission over 5 m² unless it drains to a lawn or border. The access drive must be bound (for example bituminous) for at least 5 m inside the boundary, water must not drain onto the highway, and the crossing isn't authorised until the driveway is finished. (source)

Two practical points follow. First, some councils won’t build or permit the crossing until the driveway is in place. Birmingham says you build the permeable hardstanding before it does any work to the kerb, and Cumberland won’t authorise the crossing until the driveway is completed. So plan the drive and the application together. Second, a council’s own driveway rules can be stricter than the planning slope guidance: Birmingham declines driveways steeper than 1 in 10.

The crossing itself, across the pavement, isn’t yours to specify. It becomes part of the public highway and is surfaced to the council’s specification, which is often tarmac to match the footway (see who chooses the crossing surface). Check the rules for your area on your council’s page and in dropped kerb rules and sizes. If you want the application prepared for you, our £129 application service provides a scaled 1:200 site plan and the form answers. The council’s own fees are separate, and only the council can approve it.

Tarmac options compared

Tarmac-type front driveways at a house in England: what drains, and whether planning permission is needed
SurfaceLets water through?Planning permission needed?Note
Ordinary tarmac (asphalt)NoYes, if it covers more than 5 m² and drains to the road or a drainTreated as impermeable in the government's guidance
Permeable tarmac (porous asphalt)Yes, over an open-graded sub-baseNoThe guidance says it should be supplied and laid by a specialist company
Ordinary tarmac + soakaway or rain gardenSurface no; the run-off goes to your own groundNo, if the water really reaches a permeable area within the propertyDeeper excavation and space; soakaways must be kept away from foundations
ResinDepends on the systemDepends on whether the whole construction is permeableCumberland lists resin-bound gravel as permeable; Bracknell Forest lists non-porous resin as needing permission

The guidance gives the same pros and cons for all hard permeable surfaces, porous asphalt included. They are "hard and durable with a very long service life if correctly constructed" and need the least maintenance of the options. On the other hand, they "can be more expensive than other options" and need a knowledgeable contractor, "especially porous asphalt which should be provided and laid by a specialist company".

How a porous asphalt driveway is built

The difference is mostly underneath. According to the government’s guidance:

  • Total depth. There will normally be about 200 mm to 250 mm of material from the finished surface down.
  • Geotextile. A layer of permeable fabric goes over the soil at the base, to stop the sub-base sinking into the soil and to help prevent weeds.
  • Open-graded sub-base. About 150 mm of sub-base is laid on the geotextile and compacted. For permeable surfaces it must be an open-graded stone with voids and no fine material (the guidance names 4/20 and Type 3), so water can pass through and be stored while it soaks away.
  • Not Type 1 or hardcore. The sub-base under conventional driveways, which contractors call MOT Type 1, has a lot of fine material that "stops water passing through it easily". A porous surface laid on it won’t drain the way the guidance intends.
  • The porous asphalt surface goes on top. The guidance says it should be supplied and laid by a specialist company.

The guidance says casual contractors who knock on your door offering to lay a driveway shouldn’t be used to build permeable driveways, and suggests getting references from previous clients. Our guide to choosing a contractor covers the questions to ask about the dropped kerb itself.

Slopes, ground and other checks

  • Slopes. If the drive is steeper than 1 in 20, the guidance says it may not be suitable for permeable surfacing. In that case, use an impermeable surface and send the water to a soakaway or rain garden or, as a last resort, to the drains that take roof water. Don’t direct water towards a neighbour’s property.
  • Clay soils. The ground under the drive should be sandy or gravelly. On very clayey soils the guidance suggests a pipe in the sub-base to the roof drains, so water doesn’t sit in it. Its rule of thumb is that a pipe is needed if a water-filled pit 300 mm on each side takes more than 11 hours to empty.
  • Soft ground. If a 50 mm square wooden peg goes more than 150 mm into the ground easily, the ground may be too soft and you need expert advice.
  • Underground services. Make sure there are no water pipes or cables close to the surface where you’re digging.
  • Converting an existing drive. Ask a builder first, because the drive may also be draining water from the roof.

Once it’s laid, the guidance gives a simple test. Run a hosepipe onto the surface for 1 or 2 minutes. There should be no puddles, and the water should soak straight in without flowing over the surface for more than 200 to 300 mm.

Cost

We don’t publish a price per square metre for permeable tarmac, because no government or council source we’ve found does, and installers’ prices depend on the area, the depth of dig, access and your ground. Two things from the guidance are worth knowing. Hard permeable surfaces "can be more expensive than other options", but permeable driveways in general "do not necessarily cost more or require a lot of maintenance". Ordinary tarmac over 5 m² at the front may also need a planning application, which has its own fee.

When you compare quotes, ask each installer to state the surface product, the sub-base material and depth, whether a geotextile is included, and how the edges and the boundary with the pavement will drain. The dropped kerb is a separate job with its own council fees: see dropped kerb cost.

Looking after a permeable tarmac drive

The guidance’s advice for all permeable surfaces applies:

  • Do clear up leaves, mud and litter before they clog the surface, brush it if dirt collects, and remove weeds by hand or with a weed burner.
  • Don’t put soil or sand on it, mix concrete on it, pour oil or other liquids on it, let garden beds wash onto it, or use weed killer.
  • If it blocks: porous asphalt can be unclogged using a small vacuum road sweeper or a jet washer.

In Wales, a permeable front surface must also be permanently maintained so it keeps complying (see looking after a permeable driveway).

Questions people ask

Is tarmac permeable?

Ordinary tarmac isn't. The government's guidance treats conventional asphalt as an impermeable surface, and Cumberland Council lists standard ‘tarmac’ with concrete and ordinary block paving as traditional impermeable driveways. Porous asphalt (permeable tarmac) is a different mix with open voids, laid over an open-graded stone sub-base so the water has somewhere to go.

Is permeable tarmac the same as porous asphalt?

Broadly, yes: both describe a tarmac-type (asphalt) surface with open voids that let water through. The government's guidance, Bristol and Bracknell Forest call it porous asphalt; Birmingham calls it porous tarmac. Ask your installer to name the product and confirm in writing that the finished surface and the layers under it are permeable.

Do I need planning permission for a tarmac driveway?

In England, at a house, not if the driveway is permeable or the water runs to a lawn or border within your property. You do need it for an impermeable surface, such as ordinary tarmac, covering more than 5 square metres between the front of the house and the road, unless that run-off goes to a permeable area on your land. Flats don't have these rights, and they can be removed in some areas. Wales and Scotland have stricter rules for front gardens.

How much does a permeable tarmac driveway cost?

We don't publish a price per square metre, because no official source does and installers' prices vary with the area, the depth of dig, access and your ground. The government's guidance says hard permeable surfaces can be more expensive than other options, but that permeable driveways don't necessarily cost more overall. Get written quotes that list the sub-base depth and material. The dropped kerb is a separate cost.

Can I lay porous asphalt over my old tarmac drive?

Not as a like-for-like resurface if you want it to count as permeable. The guidance describes porous surfaces laid over an open-graded sub-base, and says the Type 1 or hardcore under conventional drives stops water passing through easily. Water needs to get through every layer. Ask a builder before converting an existing drive, because it may also be taking water from the roof.

Does my dropped kerb have to be permeable tarmac too?

No. The crossing across the pavement becomes part of the public highway, and the highway authority decides how it's surfaced. The permeable rules are about the driveway on your own land.